Owner manual

volume
Adjusts the subwoofer’s output level.
phase
Allows the phase of the subwoofer to be
adjusted between 0° (normal) and 180°
(inverted).
low pass (Hz)
Adjusts the point as which higher frequencies
are fi ltered from the subwoofer.
power mode
When set to auto (default) the subwoofer
will automatically switch on when a signal is
present. After 10 minutes the subwoofer will
switch into standby if no signal is present.
loop through
Line level (unfi ltered) ouput.
line In
Line level stereo input.
3
controls and features