Manual

SOFTWARE SERVICE TOOL 7
61
ALTOSONIC V12
www.krohne.com04/2013 - 4002643502 - MA ALTOSONIC V12 R02 en
7.9 Creating reports
The service tool has been developed to also enable you to create records regarding the state of
the ultrasonic flowmeter and the way the meter performs. Records can be printed reports or
records can be exported and saved as data files on a storage medium.
Records can be created regarding:
• the actual parameter values as present in the meter, governing the performance and
functionality of the meter
• process values as observed at a specific instant
• the Modbus address mapping regarding the parameters and process values that can be
retrieved from the meter using Modbus register addressing
• rights and/or restrictions regarding access to the ultrasonic meter and the functionality of
this service tool, as is available for a user of a specific category (such as operator, supervisor,
calibrator, service technician or factory authorized support engineer).
To obtain a report:
Click “Tools” to open the Tools menu.
Click “Reporting” to open the Reporting submenu.
7.9.1 Reporting related to parameter settings
Click “Parameters” to open a window in which all parameters are listed.
Figure 7-38: Tools > Reporting menu