Instruction Manual

BM 102 71
5.3 Gauge dimensions
This diagram illustrates standard gauge configurations and overall dimensions.
Housing
Standard,
M16 terminal box*
Standard, DIN
connector** with
threaded
connection
High
temperature
version
With
inactive
length***
Probe
3: Coaxial
Ø 28 (1.1)
4: Twin cable
Ø 4 (0.15)
2: Single cable
Ø 4 (0.15)
1: Single rod
Ø 8 (0.3)
6: Single cable
Ø 8 (0.3)
Standard counterweight
None Ø45x60
(Ø1¾x2½ )
Ø25x100
(Ø1x4)
None Ø12x100 (ؽx4)**** or
Ø45x245 (ؽx9¾)*****
Size of threaded hole in base of counterweight for anchoring
None M8 M8 None M8
Dimensions in mm (inches)
* with a cable fitting M16X1.5 Ø3.5-Ø8 ** with a cable fitting PG11 Ø8-Ø10 DIN43650-A
*** the inactive length (i.e. a non-active extension at the top of the probe) may be supplied with
the following standard lengths : 100 mm or 4”, 200 mm or 8”, 300 mm or 12”, 400 mm or 16”, 500
mm or 20” and 1 m or 40“ – for single rod and single cable probe versions only.
**** where L
> 10m or > 33ft ***** where L < 10m or < 33ft L = ordered probe length