Instruction Manual

BM 102 89
Appendix A: BM 102 Level Gauge Configuration Record
Please enter the data that has been set in the signal converter.
BM 102 Parameters Checklist
Firmware-Vers.: Date:
Device: Comm. No.:
Location:
Contact person: Telephone:
Remarks:
Menu item changed, date: …./…../……….. …./…../……….. …./…../………..
Fct. User configuration parameters
1.1.1 Tank height
1.1.2 Dead zone
1.1.3 Time constant
1.1.6 Probe length
1.2.4 Length unit
1.2.5 Volume unit
1.2.6.1 (new) unit name
1.2.6.2 (new) unit factor
1.3.1 Current output 1, item
1.3.2 Current output 1, range
1.3.3 Scale I1 min (4mA)
1.3.4 Scale I1 max (20mA)
1.3.5 Error delay
1.4.4 Device number
1.5.1 Detection delay
1.6.2 Address
Threshold
Strapping (volume) table values (please specify units)
Point Level Volume Point Level Volume
0 10
1 11
2 12
3 13
4 14
5 15
6 16
7 17
8 18
9 19
Menu item changed, date: …./…../……….. …./…../……….. …./…../………..
Fct. Factory configuration parameters (KROHNE SERVICE TECHNICIANS ONLY)
1.1.1 Probe type
1.1.2 Offset
1.1.3 Application type
1.1.4 Epsilon R
2.1 Electronic offset
2.4 Electronic Calspeed
2.5 Mechanical Calspeed
2.6 Reference frequency