Instruction Manual

BM 102 9
1.3.2 Installation instructions: nozzle
Threaded process connections Nozzle height
Recommendation
The simplest and most economic way is to
mount the BM 102 directly on the tank with a
GAS or NPT threaded connection.
Do not fit a nozzle longer than its
diameter , especially for single
probes and powder applications
h ≤ Ød
, where h = nozzle height and
d = nozzle diameter
Contact KROHNE if this relationship cannot be
respected.
Nozzles extending into tank
Caution:
Do not use nozzles that extend into the tank. This will disturb the electromagnetic
emitted pulse and the measurement.