User Manual

Fct. No. Text Description and settings

3.4.0 PULS.OUTP. P Submenu 3.4.0 Frequency output P

3.4.1 FUNCTION P Function frequency output P

* OFF (Output = 0V DC)

* MASS FLOW (Frequency output 0 to MAX Freq. Hz =

Mass Flow in range: MIN. FLOW to MAX FLOW as set

in Fct. 3.4.3 and 3.4.4)

* MASS TOTAL(1 pulse = fixed mass as set in Fct 3.4.2)

* DENSITY (Frequency output 0 to MAX Freq. Hz =

Density in range: MIN.DENSITY to MAX.DENSITY as

set in Fct. 3.4.3 and 3.4.4)

* TEMPERAT. (Frequency output 0 to MAX Freq. Hz =

Temperature in range: MIN. TEMP to MAX. TEMP as

set in Fct. 3.4.3 and 3.4.4)

* VOLUME.FLOW(Frequency output 0 to MAX Freq. Hz

= Volume flow in range: MIN. V.FLOW to MAX.

V.FLOW as set in Fct. 3.4.3 and Fct. 3.4.4)

* VOL.TOTAL(1 pulse = fixed volume as set in Fct 3.4.2)

SOLUTE.FLOW

SOLUTE.FLOW Concentration parameters if

CONC.BY.MASS option installed. See separate

CON:BY:VOLUME instruction manual.

* DIRECTION (Negative flow gives output of 0 volts DC,

Positive flow gives output of +V volts DC)

3.4.2 PULSE/MASS Mass per pulse value for function TOTAL MASS

or PULSE/VOL. Volume per pulse value for function VOL. TOTAL

or PULSE/TIME Maximum frequency value for functions MASS FLOW,

DENSITY, TEMPERATUR and VOLUME.FLOW or

CONC.OPTIONS. Not accessible for functions OFF and

DIRECTION.

3.4.3 MIN.VALUE Value of measured quantity that corresponds to

or MIN. FLOW, 0 Hz output

or MIN. DENSITY,

or MIN. TEMP.

or MIN. V.FLOW

or CONC.OPTIONS

or PULSE.WIDTH For functions MASS TOTAL, VOL.TOTAL OR

SOL.TOTAL. Not accessible for functions OFF and

DIRECTIONS

3.4.4 Full Scale Value of measured quantity that corresponds to

or MAX. FLOW, Max. Frequency

or MAX. DENSITY

or MAX TEMP.

or MAX V.FLOW

or CONC.OPTIONS Not accessible for functions OFF, DIRECTION, TOTAL

MASS TOTAL, or VOL. TOTAL