User Manual

View status message(s) and quit

Button Display Description

0.36

kg/min

∇

Measurement mode

The presence of the ∇ marker above Status on the

display indicates the presence of warning messages in

the status list.

↵ CodeE 2

– –

∇

Enter access code for reset/quit menu: ↑ →

↑→ RESET.TOTAL

∇

Totalizer reset menu.

↑ STATUS.LIST

∇

View/Quit Status message menu

→ ≡ 1 Err ≡

MASS FLOW

∇

This display shows that there is just 1 warning in the list,

in this case MASS FLOW. The ≡ symbols indicate that

this is a new error and not one that has been previously

acknowledged. Use either the ↑ or → keys to view other

messages in the list. Otherwise press ↵ to exit.

→ ≡ 1 Err ≡

QUIT YES

∇

At the end of the message list the QUIT YES prompt is

shown. Selecting YES will clear if possible messages in

the list.

To cancel the operation press ↑ to get QUIT NO and

then press ↵

↵ STATUS.LIST Assuming the conditions that caused the message have

passed (i.e. mass flow is back within the meter’s range)

then the Status marker, ∇ will disappear.

↵ 0.36

kg/min

Assuming RESET YES was selected, the totalisers will

now be cleared.