User's Manual

START-UP 5

OPTIWAVE 1010

www.krohne.com09/2014 - 4003537401 - MA OPTIWAVE 1010 R01 en

Installation procedure

1 Install Microsoft® .NET Framework 1.1.

2 Install PACTware™ 4.0 or later version.

3 Install the OPTIWAVE 1010 DTM on your workstation or your portable computer. Follow the

instructions in the Installation wizard.

4 Plug the HART modem into your computer (Serial or USB HART® modem). If you are using a

USB® HART modem, you must install the Driver for the USB HART® modem first. Make sure

that the location of the port for the HART® modem is clearly identified.

5 Start the PACTware™ program.

i End of the procedure.

5.4 Remote communication with the AMS™ Device Manager

The AMS™ Device Manager is an industrial Plant Asset Management (PAM) software tool. Its

role is to:

• Store configuration information for each device.

• Support HART® devices.

• Store and read process data.

• Store and read diagnostic status information.

• Help plan preventive maintenance to reduce a plant's downtime to a minimum.

The DD file is given on the DVD-ROM supplied with the device. You can also download it from our

website.