User's Manual

DESCRIPTION OF HART INTERFACE 9
65
OPTIWAVE 1010
www.krohne.com09/2014 - 4003537401 - MA OPTIWAVE 1010 R01 en
Overview: PDM parameters
9.11.2 PDM menu tree (details for settings)
Device Menu
Configuration and Test Info. Identification
Output
Supervisor Test
Basic Parameters
Signal Output
Application
Display
Conversion Table
Reset
Access rights
HART variables
Communication Path
Downoad To Device...
Upload To PG/PC...
Update Diagnosis Status
Configuration and Test
Info. Identification
Serial Number
Rd
/ Converter Firmware
version
Rd
/ Sensor Firmware version
Rd
/ HMI
Firmware version
Rd
Output
Function I
Rd
/ Output Range
Rd
/ PV URV
Rd
/ PV
LRV
Rd
/ Output Error Delay
Rd
Supervisor Test Test I
Basic Parameters Tank Height / Blocking Distance / Time Constant /
Pipe Enable / Pipe Diameter / Pipe Height /
Antenna Extension / Antenna Type / Distance
Piece / Length Unit (HART) / Conversion Unit
(HART)
Signal Output Function I / Output Range / PV URV / PV LRV /
Output Error Delay / Current Output Calibration 1
Application Tank Type / Tracking Velocity / Epsilon R product /
Measuring Mode / Overfill Detection / Multiple
Reflection / Empty Spectrum Recording / Empty
Spectrum On/Off
Display Language / Display Length Unit / Display
Conversion Unit
Conversion Table Input Table / Delete Table
Reset Warm start (function to restart the device) / Factory
Reset / Reset Configuration Changed Flag