User Manual

START-UP

OPTIWAVE 7400-24 C

www.krohne.com12/2015 - 4004901901 - MA OPTIWAVE7400-24 R01 fr

5.3 Digital display screen

5.3.1 Local display screen layout

The current output percentage is only shown if the measurement type (refer to item 2 in the

illustration) is the same as the output function. The parameter is set in menu item 2.4.1 (OUTPUT

FUNC.). For example, if the output function is set to "Level" and the device shows "Level"

measurements in normal mode, the bar graph and value is shown (refer to item 1 in the

illustration).

Figure 5-1: Local display screen layout in Normal mode

1 Current output percentage (bar graph and text — only shown if the current output function is the same as the mea-

surement on the screen in normal mode)

2 Measurement type (in this example, distance)

3 Device status (NE 107 symbols)

4 Device tag name

5 Updated measurement data symbol (the symbol flashes each time the measurement data is updated)

6 Measurement value and units

7 Device status (markers)

8 Keypad buttons (refer to the table in the section that follows)