User Manual

APPENDIX 10
127
OPTIWAVE 7400-24 C
www.krohne.com12/2015 - 4003518001 - MA OPTIWAVE7400-24-R01-en
JIS B2220 flanges
H U P 50A JIS 10K RF (Raised Face)
L U P 80A JIS 10K RF (Raised Face)
M U P 100A JIS 10K RF (Raised Face)
P U P 150A JIS 10K RF (Raised Face)
R U P 200A JIS 10K RF (Raised Face)
Hygienic connections
H 0 S 2¨ Triclamp ISO 2852
H 0 T DN50 DIN 11851
H 0 U DN51 SMS 1145
H 0 W DN50 Neumo Bioconnect
Alternative flange faces
2 Type B2, EN 1092-1 (surface roughness must be specified in the order)
3 Type C, EN 1092-1 (Tongue)
4 Type D, EN 1092-1 (Groove)
5 Type E, EN 1092-1 (Spigot)
6 Type F, EN 1092-1 (Recess)
B FF, ASME B16.5 (Flat Face)
M RJ, ASME B16.5 (Ring Joint)
Output
OutputOutput
Output
1 2-wire / 4...20 mA passive HART
A 2-wire / FOUNDATION fieldbus
B 2-wire / PROFIBUS PA
Cable entry / Cable gland
Cable entry / Cable glandCable entry / Cable gland
Cable entry / Cable gland
1 M20×1.5 / without
2 M20×1.5 / Plastic
3 M20×1.5 / Brass
4 M20×1.5 / Stainless Steel
A ½ NPT (Brass) / without
B ½ NPT (Stainless Steel) / without
Housing (Orientation / Display / Weather protection
Housing (Orientation / Display / Weather protectionHousing (Orientation / Display / Weather protection
Housing (Orientation / Display / Weather protection
A Vertical / Without / Without
B Vertical / Display on top / Without
D Vertical / Without / With
E Vertical / Display on top / With
VF74
VF74VF74
VF74 4 Order code (complete this code on the pages that follow)
Order code (complete this code on the pages that follow)Order code (complete this code on the pages that follow)
Order code (complete this code on the pages that follow)