Owner's manual

5/4
Current output I 5.6
Fct. 1.05 CURRENT I
Press → key.
→ FUNCT. I = select function for current output, press → key
• OFF (switched off, no function)
• 1 DIR. (1 flow direction)
• 2 DIR. (2 flow directions, F/R mode, forward/reverse)
Select using ↑ or ↓ key .
Transfer to subfunction “RANGE I”
with ↵ key.
Exception: When “OFF” selected, return to Fct. 1.05 CURRENT I.
→ RANGE I = select measuring range, press → key
• 0 - 20 mA
fixed ranges
• 4 - 20 mA
Press → key to transfer to number setting.
Select with key
↑ or ↓.
Press key ↵ to transfer to subfunction “I ERROR”.
→ I ERROR = set error value, press → key
•0.0 mA
• 3.6 mA (only possible if range ”4-20 mA” selected)
•22.6 mA
Select using key ↑ or ↓. Press → key to transfer to number setting.
Press key
↵ to return to Fct. 1.05 CURRENT I.
Please refer to Sect. 3.2 “Factory settings”.
Refer to Sect. 2.3 for connection diagrams, and to Sect. 5.14 for characteristics.