Owner's manual

0/2

Part C Special applications, functional checks, service, and order numbers 6/1-9/1

6 Special applications 6/1-6/2

6.1

HHT 010 hand held terminal and RS 232 adapter incl. CONFIG software (options)

6/1

6.2 Stable signal outputs when measuring tube empty 6/2

Functional checks 7/1-7/11

7.1 Zero check with IFC 010 /D, signal converter, Fct. 3.03 7/1

7.2 Test of measuring range Q, Fct. 2.01 7/1

7.3 Hardware information and error status, Fct. 2.02 7/2

7.4 Faults and symptoms during start-up and process flow measurement 7/3-7/6

7.5 Test of primary head 7/7

7.6 Test of signal converter 7/8

7.7 Test of signal converter using GS 8A simulator (option) 7/9-7/11

Service 8/1-8/6

8.1 Cleaning the signal converter housing 8/1

8.2 Replacement of power fuse(s) 8/1

8.3 Changeover of operating voltage on AC Versions 1, 2 and 3 (not DC Version) 8/2

8.4 Replacement of electronic unit of signal converter 8/2

8.5 Illustrations to Sect. 8.2 to 8.7 8/3

8.6 Turning the display PCB 8/4

8.7 Retrofitting the display unit 8/4

8.8 IFC 080 and SC 80 AS Replacement of electronic unit by IFC 010 8/4

8.9 Illustrations of the PCBs 8/6

Order numbers 9/1

Part D Technical data, measuring principle and block diagram 10/1-12/1

10 Technical data 10/1-10/5

10.1 Full-scale range Q

100%

10/1

10.2 Error limits at reference conditions 10/2

10.3 IFC 010 Signal converter 10/3-10/4

10.4 IFC 010 F and ZD dimensions and weights 10/4

10.5 Instrument name plates 10/5

1 Measuring principle and function of the system 11/1

12 Block diagram - signal converter 12/1

Part E Index E1-E2

Printed form to accompany flowmeters returned to Krohne E3