Owner's manual

0/3
Versions IFC 010 signal converter
IFC 010_ / B Basic version (standard)
without local display and control elements.
All operating data factory-set to your order specifications.
Optionally available for operator control:
- RS 232 adapter, incl. software for DOS-PC or
- HHT hand-held terminal
IFC 010_ / D Display version (option)
with local display and control elements.
All operating data factory-set to your order specifications.
IFC 010 K / _ Compact flowmeter
signal converter mounted direct on primary head.
IFC 010 F / _ Signal converter in field housing,
electrical connection to primary head
via field power and signal cables.
Items included with supply
• Signal converter in the version as ordered, see above.
• These installation and operating instructions for the signal converter,
including 16-page pull-out condensed instructions for installation, electrical connection,
start-up and operator control of the signal converter.
• 2 plug connectors for connection of power supply and outputs/inputs
• for separate system version only
, F Version:
signal cable in the version and length as ordered (standard: signal cable A, length 10 m / 30 ft)
Software history
Display & control unit Hand-held HHT 010 CONFIG user software
IFC 010 _ / D IFC 010 _ / B** IMoCom RS 485
Software Status Software Status Software Software
806325.07* current 806328.06 current
replaces
V 2.00 V 3.15
≥ 317551.02* 806325.07 806328.06 current
and higher and higher
813269.00*** current Czech user interface ***
813340.00*** current Swedish user interface ***
* At least the same setting ranges and functional scope as preceding versions.
Also, customer- and application-specific add-on equipment possible, which has to be
installed and activated by the factory. Documented by enclosures to these Installation
and Operating Instructions.
** Please note: Connect HHT 010 only to devices without display and operator
control software.
*** Does not contain the functional scope of the currently valid standard version;
this has been taken into account in the documentation of the respective national language.