Manual

6 OPERATION

IFC 050

www.krohne.com 08/2013 - 4002184002 - MA IFC 050 R02 en

6.4 Function tables

6.4.1 Menu A, quick setup

INFORMATION!

•

The functions for the standard device are described in the following tables.

•

Special functions for Modbus are described in detail in the corresponding supplementary

instructions.

•

Depending on the device version, not all functions are available.

No. Function Setting / Description

A1 language

A1 language Language selection depends on the device version.

A2 HART

A2.1 tag Measuring point identifier (Tag no.) appears in the LC display header (up to 8

digits).

A3 RS485/Modbus

A3.1 tag Measuring point identifier (Tag no.) appears in the LC display header (up to

16 digits). The first 8 digits are identical to the HART

measuring point (see

above).

A3.2 slave address Setting the device address at the Modbus interface.

A4 reset

A4.1 reset errors reset errors?

Select: no/yes

A4.2 counter 1 reset counter?

Select: no / yes (available if activated in C5.9.1)

A4.3 counter 2 reset counter?

Select: no / yes (available if activated in C5.9.2)

A5 analogue outputs

A5.1 range Measuring range for the analogue outputs (current output, frequency output

and display)

A5.2 time constant Time constant for the analogue outputs (current output, frequency output

and display)

A5.3 low flow cutoff Low flow cutoff for the analogue outputs (current output and frequency

output)