Owner's manual

LS 4100/LS 4150

03/2002

 (OHFWULFDOFRQQHFWLRQ

3.1 Connection instructions

Note

Switch off the power supply before starting connection work.

Remove the plug. Loosen the screw (7) and disassemble the plug. Lead the connection cable

through the cable entry and connect the cables according to the following illustration.

1 Socket insert

2 Angle housing

3 Seal ring (3 pcs. for different cable ø)

4 Clamping basket

5 Pressure screw

6 Illuminated ring with LED

7 Connection screw

Plug connection

Terminals 1 - 4 are marked on the plug.

Fig. 3.1

Fig. 3.2