Owner's manual

INSTALLATION 3
13
LS 6500
www.krohne.com03/2013 - 4000649103 - MA LS 6500 R03 en
3.5 Installation of sliding connection
The following drawing shows how the sliding connection can be used for at least 4 applications:
1 Mounted at the top of a tank to adjust to a certain level.
2 Serving as a cooling neck in high media temperature applications.
3 Adjusted to place the sensor tip deeper inside the tank (for lumpy or sticky media).
4 To reach in through insulation material.
Figure 3-2: Possible applications for sliding connection
CAUTION!
The LS 6500 with sliding connection can be mounted with a static pressure up to 16 bar / 232 psi.
To prevent personnel injuries, it is essential that the safety chain is mounted correctly and
undamaged.
.book Page 13 Tuesday, March 12, 2013 11:33 AM