Owner manual

START-UP 5
23
OPTIBATCH 4011 C
www.krohne.com01/2012 - 4000868402 - MA OPTIBATCH R02 en
5.1.4 Outputs
The meter is pre-configured according to the customer's order. If it is necessary to change
output parameters, it is recommended that only Frequency and Pulse Quantity are changed.
1 Output tab
2 Frequency - sets the maximum pulse frequency to 1 kHz or 10 kHz / mass or volume
3 Pulse Quantity - sets the quantity of each pulse. The units are the same as for Mass Total
MA_OPTIBATCH_en_120302_4000868402_R02.book Page 23 Thursday, August 2, 2012 3:17 PM