Owner manual

7 TECHNICAL DATA
32
OPTIBATCH 4011 C
www.krohne.com 01/2012 - 4000868402 - MA OPTIBATCH R02 en
Operating conditions
Nominal flow rates
Nominal flow ratesNominal flow rates
Nominal flow rates
S08 10 kg/min / 22 lb/min
S10 22 kg/min / 48.4 lb/min
S15 72 kg/min / 158.4 lb/min
Ambient temperature
Ambient temperatureAmbient temperature
Ambient temperature
Compact version -40...+55°C / -40…+131°F
Process temperature
Process temperatureProcess temperature
Process temperature
Operating temperature 0…+100°C / 32…+212°F
SIP/CIP Maximum +120°C / +248°F
Maximum 1h duration
Nominal pressure at 20
Nominal pressure at 20Nominal pressure at 20
Nominal pressure at 20°C / 68
C / 68C / 68
C / 68°F
FF
F
Measuring tube
Measuring tubeMeasuring tube
Measuring tube
Stainless Steel -1…40 barg / -14.5…580 psig
Fluid properties
Fluid propertiesFluid properties
Fluid properties
Permissible physical condition Liquids
Permissible gas content (volume) Contact manufacturer for information.
Permissible solid content (volume) Contact manufacturer for information.
Protection category (acc. to EN 60529) IP 67, NEMA 6
Installation conditions
Inlet runs None required
Outlet runs None required
Materials
Stainless Steel meter
Stainless Steel meterStainless Steel meter
Stainless Steel meter
Measuring tube Stainless Steel 316L (1.4404)
Surface finish (wetted parts) Standard Ra 0.8 μm
Optional Ra 0.5 μm
Process connections Stainless Steel 316L (1.4404)
Outer casing Stainless Steel 316 (1.4401), hermetically sealed as standard
Optional polishing of all externals
Process connections
Hygienic
HygienicHygienic
Hygienic
Tri-clover ½...1¨
Tri-clamp DIN 32676 DN10...25
Tri-clamp ISO 2852 1¨
Clamp IDF 10...15A
DIN 11864-2 Form A DN20
Male thread DIN 11851 DN10...25
Male thread SMS 1¨
Male thread RJT 1¨
MA_OPTIBATCH_en_120302_4000868402_R02.book Page 32 Thursday, August 2, 2012 3:17 PM