Manual

INSTALLATION 3
31
OPTIFLEX 2200 C/F
www.krohne.com07/2013 - 4000668002 - HB OPTIFLEX 2200 R02 en
• Attach a locking nut to the housing assembly.
• Make sure that the nut is fully engaged on the thread.
• Attach the union nut to the housing assembly.
• Tighten these nuts with the two 8 mm open-ended wrenches.
• Continue the assembly procedure on the page that follows.
Figure 3-24: How to attach the locking nut and union nut