Quickstart EN Owner's manual

2 INSTALLATION
20
OPTIFLEX 2200 C/F
www.krohne.com 08/2013 - 4000622103 - QS OPTIFLEX 2200 R03 en
2.10.2 How to assemble the single rod probe (segmented probe)
INFORMATION!
This procedure is for devices with single rod probes that are segmented.
Figure 2-22: Equipment needed to assemble the single rod probe (segmented)
1 Converter and process connection
2 Bottom (quantity: 1) segment of the rod probe
3 Top and middle (if more than one) segments of the rod probe
4 Tools: two 8 mm open-end wrenches (not supplied)
5 Lock nuts (2 lock nuts per segment)
6 Union nut (1 union nut per segment)