Manual

3 INSTALLATION
20
OPTIMASS 2400
www.krohne.com 07/2014 - 4003533101- MA OPTIMASS 2400 R01 en
3.4.5 Flange connections
Tighten the flange bolts evenly and in turn.
Use a regular pattern to tighten the bolts evenly
3.4.6 Maximum pipework forces (end loadings)
Mass flowmeters have a maximum level of force (negative or positive) that can be applied to the
ends of the meter. Refer to the table in the technical data section of this Handbook for the
maximum end loadings.
MA_OPTIMASS_2400_en_140515_4003533101_R01.book Page 20 Thursday, July 31, 2014 5:08 PM