Manual

6 TECHNICAL DATA

OPTIMASS 2400

www.krohne.com 07/2014 - 4003533101- MA OPTIMASS 2400 R01 en

6.4 Maximum end loadings

• These (axial) loads have been calculated, based on 316L schedule 80 process pipework,

where un-radiographed butt welds have been used in pipe joints.

• The loads shown are the maximum permitted static load. If loads are cycling (between

tension and compression) these loads should be reduced. For advice, consult the

manufacturer.

S100 S150 S250

Flanges

FlangesFlanges

Flanges

20°C 40 barg 150kN 350kN 550kN

100 barg 100kN 120kN 60kN

150 barg

180 barg

130°C 32 barg 150kN 280kN 400kN

80 barg 60kN 50kN 50kN

115 barg

130 barg

Hygienic (all connections)

Hygienic (all connections)Hygienic (all connections)

Hygienic (all connections)

130°C 10 barg 5kN - -

MA_OPTIMASS_2400_en_140515_4003533101_R01.book Page 36 Thursday, July 31, 2014 5:08 PM