User guide

6.3 Function chart

The following chart provides an overview of the switching

conditions depending on the adjusted mode and level.

Note:

The mode on the NAMUR ampliﬁer must be set so that the

switching output goes to safe condition in case a fault

message is received (I <=1 mA).

Level Signal current -

Sensor

Control lamp

Falling characteris-

tics max.

>=2.2 mA

Falling characteris-

tics max.

<=1.0 mA

Rising characteris-

tics min.

>=2.2 mA

Rising characteris-

tics min.

<=1.0 mA

Failure any <=1.0 mA

ﬂashes

OPTISWITCH 5200 C, 5250 C - with NAMUR output 21

Set up

30434-EN-060831