User guide

Viscosity - dynamic 0.1 … 10,000 mPas(requirement: with density

Density 0.7 … 2.5 g/cm³ (0.025 … 0.09 lbs/in³);

0.5 … 2.5 g/cm³ (0.018 … 0.09 lbs/in³) by

switching over

Electromechanical data

Cable entry/plug

- Single chamber housing l 1x cable entry M20x1.5 (cable-ø 5 … 9 mm),

1x blind stopper M20x1.5

or:

l 1x closing cap ½ NPT, 1x blind plug ½ NPT

or:

l 1x plug (depending on the version), 1x blind

plug M20x1.5

Screw terminals for wire cross-section up to 1.5 mm²

(0.0023 in²)

Adjustment elements

Mode switch

- min. rising characteristics (High current when im-

mersed)

- max. falling characteristics (Low current when im-

mersed)

Sensitivity switch

- 0.50.5 … 2.5 g/cm³ (0.018 … 0.9 oz/in³)

- 0.70.7 … 2.5 g/cm³ (0.025

… 0.9 oz/in³)

Test key simulation of a line break between sensor and

processing unit

Voltage supply

Supply voltage (standard characteris-

tics)

for connection to ampliﬁer according to NA-

MUR IEC 60947-5-6, approx. 8.2 V

Open-circuit voltage U

approx. 8.2 V

Shortcircuit current I

approx. 8.2 mA

Electrical protective measures

Protection IP 66/IP 67

Depending on the version M12x1, according to DIN 43650, Harting, Am-

phenol-Tuchel, 7/8" FF.

Supplement

28 OPTISWITCH 5200 C, 5250 C - with NAMUR output

30434-EN-060831