Instruction Manual

3 INSTALLATION
36
OPTITEMP TRA/TCA PLUS
www.krohne.com 01/2012 - 4000630301 - MA OPTITEMP TRA/TCA Plus R01
3.6.3 Flange thermometer
The flange thermometer can be installed using a weld neck flange, for example, as shown in the
following drawing:
Figure 3-8: Installing a flange thermometer with a weld neck flange
1 Thermowell with flange as process connection
2 Weld neck flange
3 Pipeline or container wall
CAUTION!
When attaching the flange, tighten the screws evenly and crosswise to avoid leaks at the process
connection.
CAUTION!
You, the user, are responsible for selecting a suitable sealing material for the process
connection, not the manufacturer! When installing the seals to the process connection, always
ensure a good fit!
.backup.book Page 36 Tuesday, January 10, 2012 11:57 AM