Instruction Manual

7 TECHNICAL DATA
56
OPTITEMP TRA/TCA PLUS
www.krohne.com 01/2012 - 4000630301 - MA OPTITEMP TRA/TCA Plus R01
Flange thermometer according to DIN 43772
Flange thermometer according to DIN 43772Flange thermometer according to DIN 43772
Flange thermometer according to DIN 43772
Figure 7-8: Flange thermometer according to DIN 43772
1 TRA/TCA-TF31 (conical thermowell, one-piece, bar stock)
2 TRA/TCA-TF33 (straight thermowell, multipart, welded)
TRA/TCA-TF31
Neck tube length
"a"
Insertion length
"b"
Cone length "d" Thermowell
length "c"
Measuring insert
length
[mm] ["] [mm] ["] [mm] ["] [mm] ["] [mm] ["]
165 6.5 130 5.1 65 2.6 200 7.9 375 14.8
190 5 125 4.9 260 10.2 435 17.1
TRA/TCA-TF33
Neck tube length "a" Insertion length "b" Thermowell length "c" Measuring insert
length
[mm] ["] [mm] ["] [mm] ["] [mm] ["]
165 6.5 110 4.3 200 7.9 322 12.7
170 6.7 260 10.2 382 15.0
260 10.2 350 13.8 472 18.6
410 16.1 500 19.7 622 24.5
INFORMATION!
• Tolerances of all thermowell and insertion lengths: ± 1 mm / 0.04"
• Tolerances of all measuring insert lengths: +2 mm, -0 mm / +0.08", -0"
.backup.book Page 56 Tuesday, January 10, 2012 11:57 AM