Instruction Manual

TECHNICAL DATA 7
67
OPTITEMP TRA/TCA PLUS
www.krohne.com01/2012 - 4000630301 - MA OPTITEMP TRA/TCA Plus R01
7.6.2 Operating limits for one-piece, straight bar stock thermowells
TRA/TCA-TS36 and -TS37 with Ø 17 x 5 mm / 0.67 x 0.2"
TRA/TCA-TS52 with Ø 16 x 4.75 mm / 0.63 x 0.19"
TRA/TCA-TF55 with Ø 19 x 6.25 mm / 0.75 x 0.25"
Process connection Material Insertion length p
max
at +20°C / +400°C or
+68°F / +752°F, air
p
max
at +20°C / +400°C or
+68°F / +752°F, water /
vapour
[mm] ["] [bar] [psi] [bar] [psi]
Thread G½", G¾",
½"NPT, ¾"NPT
1.4571 /
316 Ti,
1.4404 /
316 L
82 3.2 100 / 100 1450 / 1450 100 / 100 1450 / 1450
382 15.0 31.1 / 39.5 451 / 572 100 / 100 1450 / 1450
Process connection Material Insertion length p
max
at +20°C / +400°C or
+68°F / +752°F, air
p
max
at +20°C / +400°C or
+68°F / +752°F, water /
vapour
[mm] ["] [bar] [psi] [bar] [psi]
Thread G½", G¾",
½"NPT, ¾"NPT
1.4571 /
316 Ti,
1.4404 /
316 L
100 3.9 100 / 100 1450 / 1450 100 / 100 1450 / 1450
300 11.8 44.8 / 56.7 649 / 822 100 / 100 1450 / 1450
Process connection Material Insertion length p
max
at +20°C / +400°C or
+68°F / +752°F, air
p
max
at +20°C / +400°C or
+68°F / +752°F, water /
vapour
[mm] ["] [bar] [psi] [bar] [psi]
Flanges ASME 1",
1½", 2" 150 lb
1.4404 /
316 L
100 3.9 15.9 / 6.5 231 / 94 15.9 / 6.5 231 / 94
300 11.8 15.9 / 6.5 231 / 94 15.9 / 6.5 231 / 94
Flanges ASME 1",
1½", 2" 300 lb
100 3.9 41.4 / 24.3 600 / 352 41.4 / 24.3 600 / 352
300 11.8 41.4 / 24.3 600 / 352 41.4 / 24.3 600 / 352
Flanges ASME 1",
1½", 2" 600 lb
100 3.9 82.7 / 48.6 1199 / 705 82.7 / 48.6 1199 / 705
300 11.8 62.0 / 48.6 899 / 705 82.7 / 48.6 1199 / 705
Flanges DN25, DN50
PN40
100 3.9 40.0 / 25.7 580 / 373 40.0 / 25.7 580 / 352
300 11.8 40.0 / 25.7 580 / 580 40.0 / 25.7 580 / 373
.backup.book Page 67 Tuesday, January 10, 2012 11:57 AM