Manual

ELECTRICAL CONNECTIONS 4
47
OPTIWAVE 5200 C/F
www.krohne.com07/2013 - 4001904902 - HB OPTIWAVE 5200 R02 en
4.3.2 How to prepare a signal cable supplied by the customer
Figure 4-6: Equipment needed to prepare the signal cable
1 Signal cable (supplied on request)
2 2 heat-shrinkable sleeves for the PVC jacket (not supplied)
3 8 ferrules for the end of the conductors (not supplied)
4 2 Faston connectors for the shield wires
5 Shield wire insulation, 2 sleeves
6 Wire stripper (not supplied)
7 Crimping pliers (not supplied)
INFORMATION!
• The Faston connector for the stranded drain wire must agree with DIN 46 228: E 1.5-8
• The wire end ferrules for the twisted pair of conductors must agree with DIN 46 228: E 0.5-8