Manual

OPERATION 6
77
OPTIWAVE 5200 C/F
www.krohne.com07/2013 - 4001904902 - HB OPTIWAVE 5200 R02 en
6.4.2 Test
Use this procedure to test the loop current. « xx » in the illustrations shows that you can change
the value or the parameter. Push the keypad buttons in the correct sequence:
Procedure
Screen Step Description
Default screen.
• [>
>>
>], [

] and [>
>>
>].
• Enter the password: [>
>>
>], [^
^^
^], [

], [

], [>
>>
>]
and [^
^^
^].
• [^
^^
^]
• [

].
• [>
>>
>].
• [>
>>
>].
• [

] to decrease the value or [

] to
increase the value.
• [^
^^
^] to confirm.
This step sets the loop current value. Make
a selection from 3.5, 4, 6, 8, 10, 12, 14, 16,
18, 20 or 22 mA.
• [^
^^
^] 3 times to go back to the default
screen.
The loop current goes back to initial value.
Default screen.