Owner's manual

User Guide for Optiwave (FMCW) DD of AMS

Dev Rev-01, DD Rev-02

3.8 Configuration Variables

To view Help for each configuration parameter, first click on Help button on toolbar & then click on

the parameter for which help is to be viewed.

3.8.1 Installation Parameters1

This plate consists of the editable parameters of the device like Tank Type, Tank Height etc. In this

plate some of the parameters are dependent on other parameters like Measuring Range, Tank Height,

etc is dependent on Tank Type, Stillwell Height, Stillwell Diameter depends upon the Application

Type which gets disabled.

On editing particular parameter it gets yellow in color and Apply button get

activated. On clicking, Apply Button the new value gets stored in the parameter.