Manualshelf

Owner's manual

ManualsBrandsKROHNE ManualsEquipmentOPTIWAVE Hart
21222324252627282930
User Guide for Optiwave (FMCW) DD of AMS
Dev Rev-01, DD Rev-02
© 2006 KROHNE SAS 26103 Romans (France) Page 26 of 34
3.8.4 Primary Output Setting
It allows user to change the upper and lower limit of the parameters set in the output selection plate for
the primary output function. The units of all these parameters are shown as set in the installation
plate2. Since only one pair of parameters can be set to the primary output function, hence the rest of
the parameters are disabled.