User Manual

6 TECHNICAL DATA
40
TIDALFLUX 2300 F
www.krohne.com 06/2013 - 4002490202 MA TIDALFLUX 2300 F R02 en
6.4 Dimensions and weights
The inner pipe diameter should match the inner diameter of the flowmeter. Since the inner
diameter is not a standard DN size, choose the inner pipe diameter to be just a little bit bigger
than the flowmeter diameter. If a lot of sediment or fat is expected the optimal solution is to
produce a diameter compensation ring on both sides to have smooth transits.
EN 1092-1
k = 230 mm / 89.1"
m = 265 mm / 10.4"
n = 251 mm / 9.9"
INFORMATION!
Detailed 2D and 3D drawings are available on the website of the manufacturer.
Nominal size Dimensions [mm] Approx.
weight
[kg]
DN PN a b Øc d ØD ØD
i
200 10 350 582 291 146 340 189 40
250 10 400 630 331 166 395 231 54
300 10 500 680 381 191 445 281 66
350 10 500 733 428 214 505 316 95
400 10 600 791 483 242 565 365 115
500 10 600 894 585 293 670 467 145
600 10 600 1003 694 347 780 567 180
700 10 700 1120 812 406 895 666 265
800 10 800 1235 922 461 1015 768 350
900 10 900 1356 1064 532 1115 863 425
1000 10 1000 1447 1132 566 1230 965 520
1200 6 1200 1639 1340 670 1405 1169 659
1400 6 1400 1842 1521 761 1630 1367 835
1600 6 1600 2042 1721 861 1830 1549 1659