User Manual

6 TECHNICAL DATA
42
TIDALFLUX 2300 F
www.krohne.com 06/2013 - 4002490202 MA TIDALFLUX 2300 F R02 en
6.5 Measuring accuracy
The measuring accuracy for partly filled pipes and completely filled pipes are different. In these
graphs it is assumed that the velocity at full scale value is at least 1 m/s (is also the standard
value for calibration, since it will result in the most accurate measurements).
Partly filled:
• v @ Full Scale ≥ 1 m/s / 3.3 ft/s: ≤ 1% of Full Scale
Fully filled:
• v ≥ 1 m/s / 3.3 ft/s: ≤ 1% of MV
• v < 1 m/s / 3.3 ft/s: ≤ 0.5% of MV + 5 mm/s / 0.2 inch/s (see following graph)
Fully filled pipes
Figure 6-3: Maximum measuring error of measured value