Instruction Manual

SAFETY INSTRUCTIONS 1

UFM 530 HT

www.krohne.com12/2013 - 4002393201- HB UFM 530 HT R02 en

1.1 Software history

1.2 Intended use

This product is designed for the measurement of liquids with high temperatures

up to 500°C / 932°F (Ex hazardous areas are limited to 440°C / 824°F).

1.3 Certifications

1.3.1 CE-certification

The device fulfils the statutory requirements of the following EC directives:

• Electromagnetic compatibility directive (EMC directive 2004/108/EC).

• Low voltage directive (73/23/EEC), product is designed in accordance with EN IEC 61010-1

first and second edition (safety requirements for electrical equipment for measurement,

control and laboratory use part 1).

• Pressure equipment directive (Module H of 97/23/EC, full quality assurance).

• ATEX directive (94/9/EC)

Release date Hardware Software Documentation

1990-05 2134721100-200 μP2: 90-05 MA UFM 530 HT R01

microcontroller: 01.13

DSP: 10.20

CAUTION!

Responsibility for the use of the measuring devices with regard to suitability, intended use and

corrosion resistance of the used materials against the measured fluid lies solely with the

operator.

INFORMATION!

The manufacturer is not liable for any damage resulting from improper use or use for other than

the intended purpose.

DANGER!

Local safety regulations shall be observed in combination with the measures special to this

product to avoid dangerous situations.