Owner manual

Contents Page
1 Description of the installation 3
1.1 Material delivered for Single Beam (SB) 3
1.2 Material delivered for Double Beam (DB) 3
2.0 Sensor distance calculation 4
3.0 Mounting of the sensor supports and the square pipe 5
4 Sensor alignment 5
4.1 Fluid alignment 6
4.2 Laser alignment 7
5.0 Welding of the sensors on the sensor support 7
6.0 Mounting of the sensors 8
7.0 Cabling, connection, final mounting 8
8.0 Programming the UFC 500 converter 9
9.0 Zero-point measurement 10
12/2000Installation and operating instructions UFM 800 W / UFM 800 C
2