User's Guide
Table Of Contents
- Kronos InTouch® DX User Guide
- Contents
- Overview
- Employee Mode Transactions
- Introduction
- Access your employee home page
- Standard transactions
- Smart View transactions
- Edit Paycode (Smart View)
- Message Center (Smart View)
- Move Paycode (Smart View)
- Request Open Shift (Smart View)
- Request Shift Swap (Smart View)
- Respond to Shift Swap Request (Smart View)
- View Accruals (Smart View)
- View My Time (Smart View)
- View Schedule (Smart View)
- View Timecard (Smart View)
- View Totals (Smart View)
- Manager Mode Transactions
- Maintenance Mode Functions
Chapter 4 Maintenance Mode Functions
112
3. Slide the Volume control, and tap Tes t Volume to listen to the setting.
4. Enable the Key Click control : Indicates whether the device emits a clicking
tone when users tap the touchscreen.
5. Tap Save Settings.
Display
Use the Display setting to adjust the brightness of the timeclock screen.
1. Tap Edit Settings.
2. Tap Display.
3. Slide the Brightness control to the appropriate level.
4. Tap Save Settings.
VNC Remote Access
This function enables a timeclock to be remotely accessed, using a VNC viewer. It
is useful for troubleshooting purposes.
1. Tap Edit Settings.
2. Tap VNC Remote Access.
3. Tap Enabled.
4. Enter the Access Password. If you have not created a password, you are
prompted to re-enter the password. The strength requirements for the VNC
remote access password are the same as those for the maintenance mode
password. See “Step 2: Maintenance Mode Password” on page 94.
Note: If you have previously created a password, the Change Password
option appears.
5. Tap Save Settings.