User's Guide

Edit Settings
113
To remotely access this timeclock using a VNC viewer, you must have the
following information:
• IP address of the timeclock.
• Remote access password for the timeclock (created in step 4).
When you connect to this timeclock using a VNC viewer, you can access the two
icons on the front of it:
To access the tools menu icon from a viewer session, press Ctrl+m.
To access the Home icon from a viewer session, press Ctrl+h.
SSH Remote Access
This function enables a device to be remotely accessed, using an SSH or SCP
viewer. It is useful for troubleshooting purposes.
1. Tap Edit Settings.
2. Tap SSH Remote Access.
3. Tap Enabled.
4. Enter the Access Password. Enter the Access Password. If you have not
created a password, you are prompted to re-enter the password. The strength
requirements for the VNC remote access password are the same as those for
the maintenance mode password. See “Step 2: Maintenance Mode Password”
on page 94.
Note: If you have previously created a password, the Change Password
option appears.
5. Tap Save Settings.
To remotely access this timeclock using an SSH viewer, you must have the
following information:
• IP address of the timeclock.
• Remote access password for the timeclock (created in step 4).