User's Guide

Chapter 4 Maintenance Mode Functions
114
Bar Code Symbology
Use the Bar Code Symbology setting to specify the types of bar codes that
employee badges use, so that the timeclock can read the badges properly. When
the host application sends the device configuration to this timeclock, it overwrites
the settings that you select here.
Caution: If you set Interleaved 2-of-5 to False, the timeclock cannot read a
Maintenance badge.
1. Tap Edit Settings.
2. Tap Bar Code Symbology.
3. Select True for each bar code type that employee badges use:
– Code 3-of-9
– Interleaved 2-of-5
– UPC-A (Universal Product Code A)
– UPC-E (Universal Product Code E)
– Code 128
– EAN-8 (European Article Numbering 8)
– EAN-13 (European Article Numbering 13)
– Code 39
– Codabar
4. Tap Save Setings.
Remote Readers
You can connect one or two remote badge readers to a given timeclock. Remote
readers can allow employees to perform simple punches.
To configure remote readers:
1. Tap Edit Settings.
2. Tap Remote Readers.