User's Guide

Standard transactions
35
Standard transactions
Standard (or local) transactions use information that is stored in the timeclock.
Administrators: You can configure the following options for standard
transactions. For details, see the device configuration online help.
• Enable biometric verification or biometric identification for home employees.
Access the Device Configuration page, and select Cards and Readers >
Biometric. To enable biometric identification, select Enable Biometric
Identification. To enable biometric verification, clear this check box.
• Enable biometric verification for non-home employees (that is, to enable
cross-punching).
Access the Device Configuration page, and select Cards and Readers >
Biometric. Select Enable Biometric Validation.
Note: Employees cannot cross-punch using biometric identification.
• Enforce biometric verification (that is, to require employees to enroll for
biometrics before performing transactions that use biometrics).
Access the Device Configuration page, and select Cards and Readers >
Biometric. Select Enforce Biometric Verification.
• Enable biometric verification for all standard transactions.
Access the Device Configuration page, and select Cards and Readers >
Biometric. Select Enable Biometric Verification on all Transactions.
Employees who are enrolled for biometrics can then use biometric
verification or biometric identification for all of the standard transactions—
that is, those that result in timecard entries, and others such as View
Attendance Balance or View Punch Status.
Note: You cannot enable biometric scanning for only selected standard
transactions. The device configuration setting that enables biometric verification
or biometric identification applies to all standard transactions that can result in
timecard entries. If you select Enable Biometric Verification on all
Transactions, you enable biometrics for all of the standard transactions.