User's Guide
Table Of Contents
- Kronos InTouch® DX User Guide
- Contents
- Overview
- Employee Mode Transactions
- Introduction
- Access your employee home page
- Standard transactions
- Smart View transactions
- Edit Paycode (Smart View)
- Message Center (Smart View)
- Move Paycode (Smart View)
- Request Open Shift (Smart View)
- Request Shift Swap (Smart View)
- Respond to Shift Swap Request (Smart View)
- View Accruals (Smart View)
- View My Time (Smart View)
- View Schedule (Smart View)
- View Timecard (Smart View)
- View Totals (Smart View)
- Manager Mode Transactions
- Maintenance Mode Functions
Chapter 4 Maintenance Mode Functions
94
Launch Quick Setup
When a new InTouch DX powers up, the Launch Quick Setup feature guides you
through the initial setup process.
Note: If the device times out during the initial setup, you can re-access
maintenance mode in three ways: use a Maintenance badge; use the tools menu on
the front of the timeclock; or use the maintenance mode button. If you have not
yet created a maintenance mode password, enter the default password (115190),
when prompted. For details, see “Access maintenance mode” on page 99.
Step 1: Pick Language
1. Select the language.
2. Tap Next, Set Maintenance Mode Password.
Step 2: Maintenance Mode Password
Note: Even if you do not require users to enter a password to access maintenance
mode, you must change the default password (115190) to a new value. That is,
you cannot set a blank password.