User's Guide
Table Of Contents
- Kronos InTouch® DX User Guide
- Contents
- Overview
- Employee Mode Transactions
- Introduction
- Access your employee home page
- Standard transactions
- Smart View transactions
- Edit Paycode (Smart View)
- Message Center (Smart View)
- Move Paycode (Smart View)
- Request Open Shift (Smart View)
- Request Shift Swap (Smart View)
- Respond to Shift Swap Request (Smart View)
- View Accruals (Smart View)
- View My Time (Smart View)
- View Schedule (Smart View)
- View Timecard (Smart View)
- View Totals (Smart View)
- Manager Mode Transactions
- Maintenance Mode Functions
Launch Quick Setup
97
Proxy Server (Optional)
1. Tap Proxy Server (Optional).
2. Complete the following fields:
– Host Name: Enter the IP address of the proxy server.
– Port: Enter the port number.
– Proxy Type: Select HTTP-Connect or SOCKS5.
3. To add a username, tap Add Username and complete the Username and
Password fields. Otherwise, go to the next step.
4. Tap Save Connection Setting.
5. Tap Next, Connect to Workforce Dimensions.
Step 5: Connect to Server
1. Enter the Server Name.
2. Enter the Tenant Identifier.
3. Enter the Port number.
4. Indicate whether HTTPS is enabled.
5. Tap Next, Test Connectivity. If successful, a configuration summary appears.
If unsuccessful, the system provides troubleshooting suggestions.
Complete the setup
Use the host application to complete the following tasks (for details, see the
device configuration online help).
• Add the timeclock to your system configuration, and assign it to a device
group.
• Test the communication between the host application and the timeclock.
• Define the transactions (in employee mode and manager mode) that users can
perform at the timeclock.