User's Guide
Table Of Contents
- Kronos InTouch® DX User Guide: Workforce Dimensions™
- Contents
- Overview
- Employee Mode Transactions
- Introduction
- Access your Individual home page
- Standard transactions
- Smart View transactions
- Edit Paycode (Smart View)
- Message Center (Smart View)
- Move Paycode (Smart View)
- Request Open Shift (Smart View)
- Request Shift Swap (Smart View)
- Respond to Shift Swap Request (Smart View)
- View Accruals (Smart View)
- View My Time (Smart View)
- View Schedule (Smart View)
- View Timecard (Smart View)
- View Totals (Smart View)
- Manager Mode Transactions
- Maintenance Mode Functions
- Troubleshooting
Chapter 4 Maintenance Mode Functions
102
Ethernet
1. Tap Ethernet.
2. Do one of the following:
–Tap Static IP. Go to the next step.
–Tap DHCP. Go to step 4.
3. Complete the following fields:
– IP Address: Enter the IP address for this timeclock.
– Subnet Mask: Enter the IP address for the sub-network.
– Gateway Address: Enter the gateway IP address.
– Primary DNS: Enter the IP address for the primary DNS server.
4. Tap Save Configuration.
5. Tap Next, Connect to Server.
Wi-Fi (Optional)
1. Tap Wi-Fi.
2. Do one of the following:
– Select a network. Go to step 6.
–Tap Add Network. Go to the next step.
3. Enter the SSID.
4. Select the type of Security.
5. Tap Add Network.
6. Add any necessary network details.
7. Tap Save Configuration.
8. Tap Next, Connect to Server.