User's Guide

Chapter 4 Maintenance Mode Functions
112
To configure the device to use the IPV4 address format:
1. Tap Edit Settings.
2. Tap General Communication.
3. Tap IPV4.
4. Address Mode—do one of the following:
–Tap DHCP. Go to step 8.
–Tap Static. Go to the next step.
5. IP Address: Enter the IP address for this device (the default value is 127.0.0.1)
and tap Enter.
6. Subnet Mask: Enter the IP address for the sub-network (the default value is
255.255.255.0) and tap Enter.
7. Gateway: Enter the gateway IP address (the default value is 127.0.0.2) and tap
Enter.
8. Speed—tap one of the following:
–Auto
– 10 Full Duplex
– 10 Half Duplex
– 100 Full Duplex
– 100 Half Duplex
9. Primary DNS Server: Enter the IP address and tap Enter.
10. (Optional) Secondary DNS Server: Enter the IP address and tap Enter.
11. Tap Review.
12. Tap Submit.