User's Guide
Table Of Contents
- Kronos InTouch® DX User Guide: Workforce Dimensions™
- Contents
- Overview
- Employee Mode Transactions
- Introduction
- Access your Individual home page
- Standard transactions
- Smart View transactions
- Edit Paycode (Smart View)
- Message Center (Smart View)
- Move Paycode (Smart View)
- Request Open Shift (Smart View)
- Request Shift Swap (Smart View)
- Respond to Shift Swap Request (Smart View)
- View Accruals (Smart View)
- View My Time (Smart View)
- View Schedule (Smart View)
- View Timecard (Smart View)
- View Totals (Smart View)
- Manager Mode Transactions
- Maintenance Mode Functions
- Troubleshooting
Chapter 4 Maintenance Mode Functions
114
Configure settings
The timeclock supports only DHCP connections for Wi-Fi.
Note: The timeclock can take up to several minutes to make the wireless
connection. A confirmation page indicates whether the connection was successful.
After you complete the Wi-Fi settings, ensure that the IPV4 settings are
configured correctly for the Wi-Fi network (see “IPV4 Configuration” on page
111).
1. Tap Edit Settings.
2. Tap Connect to Network.
3. Tap Wi-Fi.
4. Slide the OFF button to ON.
5. Tap the appropriate network from the list.
6. Tap Connect to network.
7. Scroll to and tap the Identity field.
8. Use the keypad to enter the user name (for example,
john.doe@company.com) and tap Next.
9. Tap Next.
10. Enter the user’s password, and tap Done.
11. Tap Save. Under the name of the network you selected (in step 5), the
processing status appears (Connecting, Saving, and so on).
12. To return to the Maintenance mode home page, press the Home icon on the
front of the timeclock.
13. Tap Reports.
14. Tap Network.
15. Ensure that the Wi-Fi Connection Status is Connected, and that the IPV4
Configuration displays the correct IP address.