User's Guide
Table Of Contents
- Kronos InTouch® DX User Guide: Workforce Dimensions™
- Contents
- Overview
- Employee Mode Transactions
- Introduction
- Access your Individual home page
- Standard transactions
- Smart View transactions
- Edit Paycode (Smart View)
- Message Center (Smart View)
- Move Paycode (Smart View)
- Request Open Shift (Smart View)
- Request Shift Swap (Smart View)
- Respond to Shift Swap Request (Smart View)
- View Accruals (Smart View)
- View My Time (Smart View)
- View Schedule (Smart View)
- View Timecard (Smart View)
- View Totals (Smart View)
- Manager Mode Transactions
- Maintenance Mode Functions
- Troubleshooting
Edit Settings
117
VNC Remote Access
This function enables a timeclock to be remotely accessed, using a VNC viewer. It
is useful for troubleshooting purposes.
1. Tap Edit Settings.
2. Tap VNC Remote Access.
3. Tap Enabled.
If you have not created a password, you are prompted to re-enter the
password. The strength requirements for the VNC remote access password are
the same as those for the Maintenance mode password. See “Step 3:
Maintenance Mode Password” on page 100.
Note: If you have previously created a password, the Change Password
option appears.
4. Tap Save Settings.
To remotely access this timeclock using a VNC viewer, you must have the
following information:
• IP address of the timeclock.
• Remote access password for the timeclock (created in step 4).
When you connect to this timeclock using a VNC viewer, you can access the two
icons on the front of it:
• To access the tools menu icon from a viewer session, press Ctrl+m.
• To access the Home icon from a viewer session, press Ctrl+h.
SSH Remote Access
This function enables a device to be remotely accessed, using an SSH or SCP
viewer. It is useful for troubleshooting purposes.
1. Tap Edit Settings.
2. Tap SSH Remote Access.
3. Tap Enabled.