Administrative Regulations on Low Power Radio Waves Radiated Devices warning: Article 12 Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to a approved low power radio-frequency devices.
OVERVIEW TOUCHSCREEN CHARGING TERMINALS WAKE THE DEVICE EXIT A MENU MOVE BETWEEN SCREENS # Double tap the touchscreen. ¥ Double tap the touchscreen. § Swipe left or right, (horizontal mode] B Zeffirelli screen turns off when up or down vertical model. not use.
CHARGING Charge ZeFit*HR for ane and a half hours before your first use. 1. Put Zenith on the magnetic charging dock. 2. Make sure the pin on the charging dock fit correctly onto the charging terminals on the back of Zeffirelli 3. Plug the small end of the USB cable provided into the charging’s dock USB port. 4. Plug the big end of the USB cable into a Dower Source, 5. A battery indicator will fill to indicate charging is in progress. Once Zeffirelli is charged, the battery indicator will be full.
PAIRING The first time you use Zenith, a SET UP message will prompt you to set up your Prizefighting a mobile device. GET Refit? APP To set up your Zenith using your mobile device, you first need to get Refit! App. Search for Refit* App in the App store or Google Play, download and install the App on your mobile device. # Available on the | App Store Stern Requirements hE » Google play | ins Android {088+ devices with Bluetooth BIBLE Select Android 5.
1. Enable Bluetooth on your mobile devices. 2. Open Refit* App on your mobile device. Sign up if you are a new member or Log in with your existing account. After entering your personal information, tap Set up. 3. Make sure Filthily is nearby and select Refitting in the list of devices. 4. You will receive a pairing request on your mobile device. Press Pair to accept it 5. Then, a pairing request will appear on your Retrofit display. $7? + Tap on your Prizefight to accept the pairing. 6.
TECH SPECS Size & Circumference 455 x 18.
REGULATORY NOTICES : Fe FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. CAUTIONS Any changes or modifications not expressly approved by the parky responsible for compliance could void your authority to operate the equipment.
