Instructions / Assembly

Improper installation of hardware.
Discoloration or rusting caused by decorative metal accent options (such as
grilles, clavos, straps, etc.) or hardware or inserts (such as locksets, door handles,
strikes, etc.).
Installation of an interior door in an exterior application.
Door must be finished on all six sides.
Door installation before mudding and taping is dried and complete.
Failure to install an exterior door under an adequate overhang or with adequate
protection from the elements. Adequate overhang means a minimum overhang
projecting a distance from the structure equal to one-half the distance between the
bottom of the door and the bottom of the overhang at the point which is farthest
from the door. South and southwest facing exterior doors void the warranty.
Failure to report problems with installed glass before a door is machined or
finished.
Krosswood Doors is not responsible for any problems related to glass installed in
a Krosswood Doors door by a distributor or other door shop or any Krosswood
Doors door with problems resulting from improperly installed glass. These
problems include, but are not limited to, glazing, waterproofing of glass and
accompanying door cracks, blemishes, moisture in the glass, or any injury caused
by or related to glass in a Krosswood Doors door.
Acceptable characteristics include variations in color, stain, wood grain, grain
appearance, unlimited tight knots and unlimited worm holes. These variations in
the product are completely normal and are not covered by this limited warranty.
Krosswood Doors sells a specific low moisture door for the Arizona market and
marks them accordingly. Any warranty claim from within the state of Arizona
must include evidence that the subject door has this marking on the door. Failure
to provide such evidence will invalidate this limited warranty for doors installed
in Arizona (i.e. the door has been purchased outside Arizona without the
necessary low-moisture rating).
Modifying a Krosswood Door will void this limited warranty. Improper
modifications include, but are not limited to, excessive trimming, removing
panels, v-grooving damage (v-grooves in excess of 3/8" wide and 3/16" deep),
and distressing damage. Allowable trimming on a Krosswood Doors door is ½”
from the sides of the door and the top of the door and 1” from the bottom of the
door.
Failure to report to Krosswood Doors any visible defect or mistake in shipment
more than 24 hours after receipt, or after the product is machined or installed.
Procedures you must follow to exercise this limited warranty. The integrity of a
Krosswood Doors door is predicated upon the adherence to the following procedures.
Failure to observe these procedures may result in or precipitate an adverse reaction of the
product, and shall void any warranty or claim.
Handling