Owner's Manual

8” Center Wall Mount Space Saver Pre-Rinse
Royal Series Plumbing
Model:
Project:
Item #:
Qty:
Date:
Approved By:
Due to our commitment to continued product improvement, specifications are subject to change without notice.
Rev. 9/2019 • No. 18-706L
Krowne Metal Corporation • 100 Haul Rd. Wayne, NJ 07470 • Toll Free: [phone] • Fax: [phone] • [e-mail] • krowne.com
▪ ¼ Turn High Performance Ceramic Cartridge Valves with Integral Check
▪ Heavy Duty Flanges with Eccentric Fittings Allow Alignment Adjustments for Quick
Installation
▪ Durable Full Range Swing Spout with Double O-Ring Construction
▪ Lever Handles
▪ Wall Bracket and Mounting Kit Included
▪ Knife Style Spray Valve
▪ Stainless Steel Corrugated Hose over Radial Wrap Tubing
▪ E-Z Install Swivel Fitting on Hose End for Quick Installation
▪ Warranty: 3 Years
▪ 8” Center Wall Mount Pre-Rinse with Add-On Faucet and 6” Spout, Polished
Chrome Finish, Wall Bracket and Mounting Kit Included, 1.15 GPM Spray Head,
1.8 GPM Faucet Aerator Installed
18-706L
STANDARD FEATURES
DESCRIPTION
PRODUCT COMPLIANCE
SPECIFICATIONS
Water Inlet 1/4” NPT
Temp. Range 40°F - 180°F
Rough In 7/8” Round Holes on 8” Center
Flow Rate 1.15 GPM Spray Head, 1.8 GPM Faucet Spout
Riser 3/8” NPT x 8”
Add On Faucet 6” Spout
Dimensions 22.5” Height with 8” Overhang
Material Chrome Plated Brass
Weight 13 lbs.
▪ ASME A112.18.1/CSA B125.1
▪ NSF-61
▪ NSF/ANSI 372
▪ Meets ANSI A117.1 (ADA)
▪ California Proposition 65
▪ CEC Listed
▪ Massachusetts Approved
WARNING: Plumbing connections should be made by qualified personnel
who will observe all applicable plumbing, sanitary and safety codes.
18-708L
22 1/4" 9 9/16"
4 15/16"
6 15/16"
6"
2 7/16"
4 7/16"
8"
12 3/8"
7 5/8"
7 3/8"
4 1/4"