BOTTLE COOLERS SLIDE TOP INSTALLATION AND OPERATION INSTRUCTION MANUAL MODEL SERIES BC24-__ __ BC36-__ __ BC72-__ __ BC96-__ __ BC48-__ __ Printed in the USA Rev. 11/2012 Krowne Metal Corporation No. BC-1.02 100 Haul Rd. Wayne, NJ 07470 • Toll Free: (800) 631-0442 • Fax: (973) 872-1129 sales@krowne.com • www.krowne.com • www.facebook.com/KrowneMetal • www.twitter.
“WE RAISE THE BAR” TABLE OF CONTENTS WARRANTY INFORMATION 3 INSTALLATION 4 OPERATION & MAINTENANCE 5 SPECIFICATIONS 6 WIRING DIAGRAM 7 PARTS BREAKDOWN 8,9 FREQUENTLY ASKED QUESTIONS 10 *** IMPORTANT *** CONDENSER MUST BE CLEANED EVERY 60 DAYS OR MAY VOID WARRANTY *** IMPORTANT *** WARRANTY WORK MUST BE AUTHORIZED BY FACTORY PRIOR TO SERVICE BEING DONE *** IMPORTANT *** COOLER MUST BE LEVEL TO OPERATE PROPERLY * This equipment is intended for the storage and display of non-potentially-haza
WARRANTY INFORMATION All Krowne Metal Corporation (KMC) refrigeration products are warranted to be free of defects in material and workmanship within one year of factory ship date. WARRANTY FORM A warranty form is included with the refrigeration unit and must be completed and returned to KMC. You can also visit us at www.krowne.com and register online. Registration must be complete within 2 weeks of install. Failure to do so may void labor warranty.
INSTALLATION At Krowne Metal Corporation (KMC) we are dedicated to customer satisfaction. This installation guide is provided to clarify and answer any questions you may have regarding our line of Slide Top Bottle Coolers. Please read this guide before attempting installation or operation. Thank you for choosing KMC as your Bottle Cooler provider. UNCRATING Remove all shipping material from unit before operation.
OPERATION AND MAINTENANCE OPERATING TEMPERATURE The operating temperature of the Slide Top Bottle Cooler is pre-set at the factory for an average of 36°. Average operating range is from 32° to 40°. Thermostat is located on the front of the evaporator housing inside of the unit and may be adjusted using a flat-head screw driver. IMPORTANT: Any adjustments to temperature should be made in small increments to prevent damage to unit.
SPECIFICATIONS MODEL NO. BC24- BC36- BC48- BC72- BC96- NO. OF DOORS 1 1 2 2 3 LENGTH 24” 36” 48” 72” 96” DEPTH 24” 24” 24” 24” 24” REFRIG. TYPE 134A 134A 134A 134A 134A CHARGE 7.0 oz. 7.0 oz. 7.5 oz. 10.0 oz. 12.0 oz. DESIGN PRESSURE H/L 440/140 440/140 440/140 440/140 440/140 H.P. 1/5 1/5 1/3 1/3 1/3 FULL LOAD AMPS 4.0 4.0 5.5 6.0 6.6 WEIGHT (LBS.) 185 220 260 350 450 115V, 1 PHASE, 60 HZ Krowne Metal Corporation 100 Haul Rd.
WIRING DIAGRAM Krowne Metal Corporation 100 Haul Rd. Wayne, NJ 07470 • Toll Free: (800) 631-0442 • Fax: (973) 872-1129 sales@krowne.com • www.krowne.com • www.facebook.com/KrowneMetal • www.twitter.
PARTS BREAKDOWN 7 9 8 10 11 6 12 13 5 15 14 16 4 17 18 19 3 1,2 20 Krowne Metal Corporation 100 Haul Rd. Wayne, NJ 07470 • Toll Free: (800) 631-0442 • Fax: (973) 872-1129 sales@krowne.com • www.krowne.com • www.facebook.com/KrowneMetal • www.twitter.
PARTS BREAKDOWN COOLER SIZE 24” 36” 48” 72” 96” ITEM NO.
FREQUENTLY ASKED QUESTIONS 1. Why is my cooler not turning on? A. Make sure unit is plugged in. B. Make sure unit is not plugged into a GFI receptacle. C. Check to see if circuit breaker is off. 2. Why was my cooler working but now has shut off? A. Check to see if circuit breaker is off. B. Make sure unit is not plugged into a GFI receptacle. 3. Why is my cooler running (compressor noise) but not getting cold? A. Make sure condenser is clean. Remove front grill to inspect. B.
WARRANTY REGISTRATION FORM PLEASE CHECK THE TYPE OF UNIT YOU HAVE: ☐ BACK BAR COOLER ☐ SLIDE TOP BOTTLE COOLER ☐ MUG FROSTER MODEL NO.: ______________ SERIAL NO.: ______________ INSTALL DATE: _______ NAME OF ESTABLISHMENT: ________________________ PHONE NO.
